What standards are automation and PLC panels built to?

Panels are engineered to the project's electrical and control standards (e.g. IEC/EN), with the PLC platform, I/O count and protection selected to the client's control philosophy and confirmed during design.

Are the panels factory-tested before shipment?

Yes. Aras performs factory acceptance testing (FAT) to verify wiring, I/O and control logic before delivery, shortening on-site commissioning.

Can Aras integrate any PLC brand?

Aras works with major PLC platforms and selects hardware to suit the client's site standard, spare-parts policy and existing systems.

Automation Panels & PLC Panels

Aras Power Systems designs and manufactures automation panels and PLC panels that bring control hardware, power distribution, I/O wiring, communication equipment and operator interfaces together in a clean, serviceable enclosure.

Our panels are built for industrial environments where uptime, maintenance access and wiring quality matter. Each panel is engineered from the project I/O list, control philosophy, load list and site conditions, then tested before delivery.

Codes & standards

Panel design is prepared according to applicable low-voltage, wiring, enclosure, earthing and project-specific client standards.

PLC panels
Remote I/O panels
Control cabinets
Marshalling panels
HMI panels
Industrial networking
FAT documentation

Our Services

Engineering and layout

Panel design: creating panel layouts, wiring diagrams, terminal plans, heat-load checks and bill of materials.
Maintainable architecture: arranging terminals, wire ducts, cable entries and spare capacity for clear field installation and future service.

Manufacturing and testing

Panel assembly: building PLC, I/O, network, power supply and relay sections with labeled wiring and industrial components.
Factory tests: performing continuity checks, power-up checks, I/O simulation and functional tests before shipment.

Site support

Installation interface: supporting cable termination, loop checking and connection to field devices.
Commissioning: assisting PLC download, network checks, HMI tests and functional start-up.

Technical specification

Panel types	PLC panels, remote I/O panels, marshalling panels, HMI panels and junction boxes
Enclosure	Wall-mounted or floor-standing, indoor or outdoor, protection class according to project requirement
Power supply	Industrial 24 VDC power supplies, redundancy where required, MCB/fuse protection and surge protection options
Wiring	Labeled wiring, terminal blocks, ferrules, cable glands and segregated power/control routing
Testing	Visual inspection, continuity test, power-up test, I/O simulation and FAT report
Documentation	Panel drawings, terminal plans, material list, test records and as-built revisions

Applications

Process automation and utility systems
PLC upgrades and remote I/O expansions
Pump stations, package systems and dosing skids
Industrial production lines and plant retrofit projects

Frequently asked questions

Can you manufacture panels according to our preferred brand list?

Yes. We can work with client-approved components and PLC platforms, subject to availability and project suitability.

Do you provide FAT documentation?

Yes. Panel FAT records, inspection documents and as-built drawings can be supplied with the delivered panel.

Can panels be prepared for future I/O expansion?

Yes. Spare terminals, cabinet space, power capacity and network ports can be included during engineering.

Request a panel design proposal

Send your I/O list, panel location, preferred PLC brand and site requirements. Aras will prepare a panel concept, scope and budget.

info@araspowersystems.com · +90 312 504 20 26 · +90 530 427 39 44